sequence

da40ng.checklist.taxi

Zod-validiert · zuletzt aktualisiert 10.8.2026, 16:08:46

Gespeichert

{
  "id": "da40ng.checklist.taxi",
  "kind": "checklist",
  "title": "Taxi Checklist",
  "source_ref": "THB DA40 CHL, Expanded Checklist, Rev 20, Effective 16 March 2026",
  "notes": [],
  "steps": [
    {
      "element": "parking_brake",
      "callout": "Parking brake — LOCKED",
      "target_state": "LOCKED",
      "changes": [],
      "detail": []
    },
    {
      "element": "flight_instruments",
      "callout": "Flight instruments — CHECKED",
      "target_state": "CHECKED",
      "changes": [],
      "detail": [
        "Attitude indicators — PFD and STBY compared, steady, no bank information",
        "Directional indicators — PFD and STBY compared, STBY: no visible bubbles"
      ]
    },
    {
      "element": "seat_belts",
      "callout": "Seat belts — ON",
      "target_state": "ON",
      "changes": [],
      "detail": []
    },
    {
      "element": "engine_system_page",
      "callout": "Engine / System page — CHECKED / GREEN",
      "target_state": "CHECKED / GREEN",
      "changes": [],
      "detail": [
        "Engine temperatures must be in green range before performing ECU test. For warm up max power 50%"
      ]
    },
    {
      "element": "circuit_breaker",
      "callout": "Circuit breaker — CHECKED / IN",
      "target_state": "CHECKED / IN",
      "changes": [],
      "detail": []
    },
    {
      "element": "trim",
      "callout": "Trim — SET FOR T/O",
      "target_state": "SET FOR T/O",
      "changes": [],
      "detail": [
        "Elevator trim — verify in T/O position"
      ]
    },
    {
      "element": "flaps",
      "callout": "Flaps — SET FOR T/O",
      "target_state": "SET FOR T/O",
      "changes": [],
      "detail": [
        "Flap lever and light — verify in T/O position"
      ]
    },
    {
      "element": "flight_controls",
      "callout": "Flight controls — CHECKED",
      "target_state": "CHECKED",
      "changes": [],
      "detail": [
        "Full longitudinal and lateral deflection on control stick — apply",
        "Full travel and correct deflection of elevator and ailerons — check visually",
        "Wording: \"Full up, full down, full left, full right\""
      ]
    },
    {
      "element": "power_lever",
      "callout": "Power lever — IDLE",
      "target_state": "IDLE",
      "changes": [],
      "detail": []
    },
    {
      "element": "ecu_test",
      "callout": "ECU test — COMPLETED",
      "target_state": "COMPLETED",
      "changes": [],
      "detail": [
        "ECU test button — press and hold",
        "ECU A/B fail annunciation — on",
        "Prop cycling — 2 times ~ 1900 RPM",
        "ECU A/B fail annunciation — off",
        "ECU test button — release"
      ]
    },
    {
      "element": "ecu_voter_switch",
      "callout": "ECU voter switch — CHECKED / AUTO",
      "target_state": "CHECKED / AUTO",
      "changes": [],
      "detail": [
        "ECU voter switch — select ECU A. Engine running without change — check (shake may occur)",
        "ECU voter switch — select AUTO. Engine running without change — check (shake may occur)",
        "ECU voter switch — select ECU B. Engine running without change — check (shake may occur)",
        "ECU voter switch — select AUTO"
      ]
    },
    {
      "element": "departure_route",
      "callout": "Departure route — VERIFIED",
      "target_state": "VERIFIED",
      "changes": [],
      "detail": [
        "Only in case of amendment of the departure route"
      ]
    },
    {
      "element": "doors",
      "callout": "Doors — CLOSED / LATCHED",
      "target_state": "CLOSED / LATCHED",
      "changes": [],
      "detail": []
    },
    {
      "element": "engine_system_page",
      "callout": "Annunciations / Engine / System page — CHECKED / GREEN",
      "target_state": "CHECKED / GREEN",
      "changes": [],
      "detail": [
        "Door warning — off"
      ]
    }
  ]
}

⌘/Ctrl + S oder Enter · 3'886 Zeichen